Pavers are available in various materials, hues, shapes, and textures. Additionally, they are highly adaptable to practically any house project imaginable. What your pavers are composed of can make a huge difference among those choices. Travertine pavers also appear to have everything.
Many believe that travertine is a delicate stone that needs excessive upkeep. This puts many people off from using travertine as a pavement material. Contrary to popular belief, that is not a characteristic of natural stone, which is also quite simple to preserve. Here are a few lesser-known maintenance tips for Travertine pavers that you should give a shot.
You should include regular cleaning in the continuing care for Travertine stone. Regularly sweeping of the pavers will help keep dirt and dust at bay. In addition, you can extend the life of Travertine pavers by giving them an occasional pressure cleaning. Sometimes the pressure washing could lift the stone’s covering and seal. After washing, it’s a good idea to seal them again.
Getting stains out
Rust, mold, or spill stains are removed with easy scrubbing. If the pavers have just been sealed, the stains are usually only surface-level and can be removed with a little scrubbing or wiping. Try a plain soap and water mixture.
If the stains have broken through the sealing, you might attempt these easy solutions:
1. Hydrogen peroxide usage
- Apply some hydrogen peroxide to the area that needs treatment
- Use a soft-bristled brush or a granite cleaning pad to spread it.
- After 24 hours, thoroughly rinse the stain with water.
2. Baking Soda Use
- Combine baking soda, water, and a small bit of normal cleaner in an equal parts mixture.
- Brush the stained area with the blended mixture.
- After the paste has been on the stain for at least 20 minutes, properly rinse.
- Baking soda and acetone should be used if the stain is from vinegar and should be left on the stain for 24 hours. Clean the area with water, a soft cloth, and a sealant.
Natural stones must be sealed because they are porous. The stone’s surface is commonly treated with sealant, which is often a transparent solution. Sealing forms a barrier on the surface that stops stains, moisture absorption, and dust buildup. It should also be sealed to stop the pores in unfilled travertine (the type with holes) from accumulating dirt, grime, or stains. After installation, the travertine should be sealed; nevertheless, ongoing sealing is highly advised. After chemically treating the pavers, you can repeat it every one to two years.
4. Mold removal
Mold is more likely to grow on travertine pool copings, pavers, and pavement in humid environments. It is a particular type of fungal growth that feeds on organic materials. It can flourish in areas that are shaded or get insufficient sunshine. Inadequate drainage, plumbing leaks, shoddy construction design, and poor landscaping facilitate mold growth. Over time, they may result in cracks, discoloration, or bacterial penetration. Use the method described below to eliminate them from Travertine pavers and prevent future moss and mold growth.
- Wet the area.
- Make hot water and light soap or detergent solution.
- Now work the solution into a scrub brush and begin rubbing the pavers. They scratch the surface if the bristles are excessively metallic or harsh.
- As you brushed the pavers, the mold would begin to detach from the surface. Continue until everything has fallen off.
- Wash the area with plain water to remove the detergent traces and leftover mold fragments.
- Re-wet the area with a soap solution if any residue is left on the surface. Talc powder should be applied on stains, allowed to absorb them, and then left on pavers to dry.
5. Removing weed
Another natural substance that haunts Travertine users is weed. Nevertheless, controlling weeds is a challenging task. You can pull the weed up by the roots to prevent further development and chemically treat it. Otherwise, weeding can be done by following the mold removal procedures outlined above.
Alternately, use a weed wacker to trim the pavers and yard’s edge. You can also install stone edgers to separate the lawn from the pavers. For those unfamiliar with the term, a weed-whacker is an electric lawn trimmer with a nylon cutting wire that spins quickly.
What to avoid?
As a sedimentary rock, travertine is a stage before limestone. Despite the stone’s calcium carbonate content, acid exposure makes it susceptible to etching. If a cleanser contains one of the following substances or fits one of the following categories, avoid using it:
- A variety of cleaners
- Vinegar, lemon, and acidic substances
- Nitrates, bleach
- Alkaline commercial cleaners for Travertine stone alone
- Scouring powder or cream
- Avoid using high pressure or heat to clean the stone
Now you realize that maintaining Travertine pavers is not the herculean undertaking that is commonly thought. These pavers last long if you plan the cleaning process well. What could be better than pavers that are not only attractive but also easy to maintain?
Travertine pavers make a better, safer, and more durable solution for any outdoor renovation. This is particularly true if you are in a region that:
- Has seasonal variations
- Has shifting home foundations
- Has weather or an outdoor pool that lends your outside living space to more water.
Travertine pavers are unquestionably the best option for your property. In contrast, conventional brick pavers fail at all three of those qualities.
To learn how much travertine pavers can enhance your outside home project, contact Standard Brick Pavers in Tampa today for additional information.